| Username | Profile | Install to Previous KVM | Preserve data in /home | Dual booting f33+f33 with btrfs | Comments |
|---|---|---|---|---|---|
| Enter result | Enter result | Enter result | |||
| ADGA | HP EliteDesk 800 G2 - Intel Core i5-6500 | [1] |
1.
Works as expected
|
||
| AZbaer | [1] |
1.
Worked flawlessly Also updatet eh install ed image with Fedora Updates[swilson@localhost ~]$ df -TH | grep "^/dev"
/dev/vda2 btrfs 21G 6.5G 14G 32% /
/dev/vda2 btrfs 21G
6.5G 14G 32% /home
/dev/vda1 ext4 1.1G 190M 763M 20% /boot
|
|||
| AZbaer | QEMU/KVM 2 CPU 2 Gb ram | [1] |
1.
After I figured out how do this test on the QEMU Worked!
|
||
| Andrew Parker | Quemu / KVM and install on to NVMe SAmsung devive from DVD | [1] |
1.
The disk space management screen from "custom" is not vey intuitive, but got there in the end.
|
||
| Andrew Parker | quemu-kvm | [1] |
1.
X86_64 / Intel(R) Core(TM) i7-6700T CPU @ 2.80GHz
|
||
| Jean1971 | Jean1971 | [1] |
1.
It works
|
||
| Jean1971 | Thinkpad x61 | [1] [2] |
1.
It works
2. It works |
||
| Konstantin Trifonov | qemu-kvm | ||||
| Legit | qemu-kvm | [1] |
1.
Works as expected.
|
||
| Marcelo Lanmaster | Fedora-Cinnamon-Live-x86_64-33-20200826.n.0.iso on VM Virtualbox (4 processors, 4G RAM) | [1] | [2] |
1.
Confirmation BTRFS ok / and /home ,, default install
2. Expected Results ok (obs. only dir /boot/efi did not exist in my case) |
|
| aathomas | T440p, i5-4300M, 16GB RAM, SSD | ||||
| adamthiede | qemu-kvm | [1] |
1.
Reinstalled preserving /home both unencrypted and with encryption. Both preserved data and worked as expected.
|
||
| akumar99 | VMware (AMD Ryzen 9 3900X - 4 cores, 8GB RAM, 100GB HD allotted) | [1] |
1.
No issues found
|
||
| akumar99 | kvm | [1] [2] |
1.
No issues found with UEFI boot as well.
2. No issues found. |
||
| alciregi | qemu-kvm | ||||
| alexsaezm | qemu-kvm | ||||
| archie | qemu-kvm | [1] |
1.
everything as expected
|
||
| bhavin192 | Fedora-Workstation-Live-x86_64-33-20200906.n.0 on QEMU/KVM | ||||
| bt0dotninja | DELL Precision 7510 Core i7 vpro | ||||
| bt0dotninja | DELL Precision 7510 Core i7 vpro Virt-Manager kvm | ||||
| bt0dotninja | Thinkpad T440s Core i5 vpro bare metal from F32 to F33 whith /home preservation | ||||
| cagdas | qemu-kvm | ||||
| cagdasbas | qemu-kvm | ||||
| condor | qemu-kvm | ||||
| csmart | [1] |
1.
tested on intel i7 and ryzen 9
|
|||
| csmart | qemu on f32 | [1] | [2] |
1.
tested on i7 and ryzen 9
2. Tested with and without encryption |
|
| curiouscrow | Intel® Core™ i7-10710U Processor | [1] |
1.
SSH service was not enabled by default, I found that surprising. Rest everything else was smooth.
|
||
| d2z | Dell Insipron 7570 | ||||
| elguitar | [1] |
1.
Worked as expected
|
|||
| elguitar | qemu-kvm | [1] |
1.
Worked as expected
|
||
| faulTTY | Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz | ||||
| fmarcos97 | qemu-kvm | ||||
| franckf | qemu-kvm-amd64 | [1] |
1.
Fedora-Xfce-Live-x86_64-33-20200831.n.0.iso
|
||
| geraldosimiao | Fedora-KDE-Live-x86_64-33-20200829.n.0.iso KVM/qemu/virt-manager Chipset i440FX UEFI x86_64: /usr/shre/edk2/ovmf/OVMF_CODE.fd | [1] |
1.
works normaly
|
||
| itamarjp | qemu-kvm | [1] |
1.
works for me.
|
||
| itrymybest80 | x86_64, PRIME Z270-A, i5-7600K, 16GB DDR4, RX 580 8GB & 970 EVO M.2 | [1] |
1.
I could perform all of my daily tasks. Default encrypted btrfs-partitioning gained me +75gb in my /home folder.
|
||
| jdt | qemu-kvm | ||||
| jesusc01 | QENU/KVM | [1] |
1.
all fine, no errors
|
||
| joydeep | qemu-kvm, Fedora 32 Workstation, GNOME 3.36.5, Intel i5-8250U(8)@3.400GHz | ||||
| kaandemircan | qemu-kvm | ||||
| kronenpj | qemu-kvm-amd64 | [1] |
1.
/boot is ext4, not btrfs. Expected?
|
||
| kushal | vmware-fusion | ||||
| lbazan | Lenovo t470 | [1] | [2] | [3] |
1.
Lenovo t470
2. Lenovo t470 3. Lenovo t470 |
| lbazan | virtualbox | [1] |
1.
[root@localhost ~]# df -T
Filesystem Type 1K-blocks Used Available Use% Mounted on
devtmpfs devtmpfs 1990628 0 1990628 0% /dev
tmpfs tmpfs 2011412
0 2011412 0% /dev/shm
tmpfs tmpfs 804568 2320 802248 1% /run
/dev/sda2 btrfs 51379200 6524508 44674164 13% /
tmpfs tmpfs 2011412 72 2011340 1% /tmp
/dev/sda2 btrfs 51379200 6524508 44674164 13% /home
/dev/sda1 ext4 999320 185524 744984 20% /boot
tmpfs tmpfs 402280 184 402096 1% /run/user/1000
[root@localhost ~]#
[root@localhost ~]# date
Tue Sep 8 03:27:43 PM EST 2020
[root@localhost ~]#
|
||
| lnie | VM | ||||
| lwh | qemu-kvm Fedora-KDE-Live-x86_64-33-20200901.n.0.iso | ||||
| maxamillion | KVM 2vCPU 8G RAM 60G HDD | ||||
| maxamillion | Starlabs Starlite mkII | ||||
| nchudnoff | qemu-kvm | ||||
| nielsenb | Compaq 8510w BIOS | ||||
| norbertj | Fedora-LXDE-Live-x86_64-33-20200831.n.0.iso on virt-manager/libvirt/qemu-kvm with UEFI | [1] | [2] |
1.
Had to run "dnf upgrade lxsession" in VT first due to rhbz1872429. Besides of that everything okay.
2. Kept existing root subvolume and created a new one. |
|
| nphilipp | QEMU/KVM x86_64 Fedora-Everything-netinst-x86_64-33-20200904.n.0.iso | ||||
| pruthvi30sk | Intel® Core™ i7-8700U CPU @ 2.10GHz × 4 | ||||
| pwhalen | KVM, AArch64 | [1] |
1.
Install from Fedora-33-20200831.n.0
|
||
| sayaksarkar | qemu-kvm | [1] | [2] | [3] |
1.
Worked as expected! Flawless Installation!
2. The expected partition layout was created and the installation process completed successfully. The installed system booted as expected and all custom made files and directories were preserved as expected. 3. The installation worked as expected. The `/home` directory retained the earlier custom made files and directories. |
| sidewinder040 | Dell Latitude E7240 Intel i7 | ||||
| sidewinder040 | QEMU/KVM | ||||
| sjreese | qemu-kvm | ||||
| sp6ina | sp6ina | [1] |
1.
Works as expected on HP 745 G3 and PC.
|
||
| temkasumy | |||||
| theo3000 | qemu-kvm | [1] |
1.
image: Fedora-Workstation-Live-x86_64-33-20200829.n.0.iso
|
||
| torsumy | |||||
| vpaduru1 | Lenovo Thinkpad X1 Carbon | [1] |
1.
Could not get the sound working though..I don't think that is something related to the Functionality for the above testing..
|
||
| xcrowbd | Drrtt | [1] |
1.
#752855,
#25532,
|
||
| zhanggyb | qemu-kvm |
| Username | Profile | custom btrfs | blivet btrfs | Comments |
|---|---|---|---|---|
| Enter result | Enter result | |||
| aathomas | T440p, i5-4300M, 16GB RAM, SSD | |||
| akik | Acer Aspire F5-572g laptop, Fedora-KDE-Live-x86_64-33-20200828.n.0.iso + updates, btrfs on /boot, / and /home | [1] |
1.
Dual boot with F31 and F33 works with every mount (/boot, / and /home) on btrfs subvolumes https://pastebin.com/raw/jUnrcHXZ . I did the storage configuration for F33 in the advanced custom ui and
after the F33 install I restored the /boot/loader/entries config files from F31 to /boot/loader/entries on F33. TESTED WITH UEFI MODE BOOT
|
|
| akik | Acer Aspire TimelineX AS3820T laptop, Fedora-KDE-Live-x86_64-33-20200828.n.0.iso + updates, btrfs on /boot and / | [1] |
1.
Dual boot with F31 and F33 works with every mount (/boot, / and /home) on btrfs subvolumes https://pastebin.com/raw/jUnrcHXZ . I did the storage configuration for F33 in the advanced custom ui and
after the F33 install I restored the /boot/loader/entries config files from F31 to /boot/loader/entries on F33.
|
|
| akumar99 | VMware (AMD Ryzen 9 3900X - 4 cores, 8GB RAM, 100GB HD allotted) | [1] | [2] |
1.
Worked fine for me.
2. Worked fine for me. |
| csmart | qemu on f32 | |||
| joydeep | QEMU/KVM, WS F33 | |||
| kushal | vmware-fusion | |||
| lbazan | virtualbox | [1] |
1.
[root@localhost ~]# df -T
Filesystem Type 1K-blocks Used Available Use% Mounted on
devtmpfs devtmpfs 1990628 0 1990628 0% /dev
tmpfs tmpfs 2011412 0 2011412 0% /dev/shm
tmpfs tmpfs 804568 2320
802248 1% /run
/dev/sda2 btrfs 51379200 6524508 44674164 13% /
tmpfs tmpfs 2011412 72 2011340 1% /tmp
/dev/sda2 btrfs 51379200 6524508 44674164 13% /home
/dev/sda1 ext4 999320 185524 744984 20% /boot
tmpfs tmpfs 402280 184 402096 1% /run/user/1000
[root@localhost ~]#
[root@localhost ~]# date
Tue Sep 8 03:27:43 PM EST 2020
[root@localhost ~]#
|
|
| lwh | qemu-kvm Fedora-KDE-Live-x86_64-33-20200906.n.0.iso | |||
| norbertj | Fedora-LXDE-Live-x86_64-33-20200831.n.0.iso on virt-manager/libvirt/qemu-kvm with legacy BIOS and 2 GPT disks | [1] | [2] |
1.
Custom setup with root and home subvolumes on Btrfs RAID1, no extra boot partition. Installation worked as expected, including GRUB being installed on both disks.
2. as 1. |
| nphilipp | QEMU/KVM x86_64 Fedora-Everything-netinst-x86_64-33-20200904.n.0.iso | |||
| sayaksarkar | qemu-kvm | [1] | [2] |
1.
Installation with custom btrfs partitioning worked as expected.
2. Custom installation with BTRS partitioning using Blivet GUI worked as expected! |
| siddharthvipul1 | Fedora-Workstation-Live-x86_64-33-20200905.n.0 on QEMU/KVM x86_64 |
| Username | Profile | Initial setup | Startup | Reboot Unmount | System Logging | Update CLI | Package Install/Remove | Service Start | Selinux | Service Manipulation | Anaconda rescue mode | Comments |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Enter result | Enter result | Enter result | Enter result | Enter result | Enter result | Enter result | Enter result | Enter result | Enter result | |||
| Andreas Sinz | [1] [2] |
1.
#1827890,
2. #1827890, |
||||||||||
| Gamma | qemu-kvm, raw disk ATA ST3250318AS | |||||||||||
| GlennJohnson | [1] | [2] |
1.
Worked as expected.
2. Worked as expected. |
|||||||||
| Konstantin Trifonov | qemu-kvm | [1] |
1.
sudo dnf install vim inkscape
rpm -q vim inkscape
->package vim is not installed
rpm -q vim
->package vim is not installed
sudo dnf install vim
rpm -q vim
-> package vim is not installed
|
|||||||||
| Kushal | vmware-fusion | |||||||||||
| Legit | qemu-kvm | [1] |
1.
tested with rpmfusion enabled.
|
|||||||||
| MarkPearson | Bare Metal Fedora 33 (Workstation Edition Prerelease) x86_64, 5.8.3-300.fc33.x86_64. Lenovo X1 Carbon G8. i7-10610U CPU, 16GB RAM, 256GB NVMe SSD | [1] |
1.
No 'Rescue a Fedora system' option available. Link in test case tdocumentation o install guide is a 404 Not Found.
|
|||||||||
| Nick_Avem | Bare Metal Fedora 33 (Workstation Edition Prerelease) x86_64, 5.8.3-300.fc33.x86_64, 1920x1080*2, AMD Ryzen 5 2600X (12) @ 3.600GHz, AMD ATI Radeon RX 5600 XT, 15990MiB RAM | |||||||||||
| Nick_Avem | Fedora 33 (Workstation Edition Prerelease) x86_64, 5.8.3-300.fc33.x86_64, 1920x1080*2, AMD Ryzen 5 2600X (12) @ 3.600GHz, AMD ATI Radeon RX 5600 XT, 1 5990MiB RAM | |||||||||||
| aathomas | T440p, i5-4300M, 16GB RAM, SSD | [1] | [2] |
1.
Both Workstation ( Gnome ) and KDE installed fine.
2. Packages and flatpaks installed, even third party repositories (VS Code) |
||||||||
| acustico | OS: Fedora 33 (Workstation Edition Prerelease) x86_64 Host: 42912WG ThinkPad X220 Kernel: 5.8.3-300.fc33.x86_64 Packages: 1733 (rpm) Shell: bash 5 .0.17 Resolution: 1366x768 DE: GNOME 3.37.91 CPU: Intel i5-2540M (4) @ 3.300GHz GPU: Intel 2nd Generation Core Processor F Memory: 1392MiB / 15888MiB | [1] |
1.
sudo dnf install texlive-scheme-full -y
|
|||||||||
| acustico | ThinkPad x220 OS: Fedora 33 (Workstation Edition Prerele Host: 42912WG ThinkPad X220 Kernel: 5.8.3-300.fc33.x86_64 Uptime: 39 mins Packages: 1733 (rpm) Shell: bash 5.0.17 Resolution: 1366x768 DE: GNOME 3.37.91 WM: Mutter WM Theme: Adwaita Theme: Adwaita [GTK2/3] Icons: Adwaita [GTK2/3] Terminal: gnome-terminal CPU: Intel i5-2540M (4) @ 3.300GHz GPU: Intel 2nd Generation Core Processor F Memory: 1392MiB / 15888MiB | [1] |
1.
everything ok
|
|||||||||
| akumar99 | VMware - Fedora 33 Workstation Edition Prerelease (AMD Ryzen 9 3900X - 4 cores, 8GB RAM, 100GB HD allotted) | [1] | [2] | [3] |
1.
#1883091,
Skipped:
cldr-emoji-annotation-1:38~beta-2.fc33.noarch
cldr-emoji-annotation-dtd-1:38~beta-2.fc33.noarch
Failed:
firefox-78.0.2-1.fc33.x86_64 firefox-81.0-6.fc33.x86_64
2. #1827890, 3. Did not run with the given command as it said permission denied so had to switch to root and then ran the commands |
|||||||
| alciregi | Dell XPS 13 9360, Intel i7-7500U, F33 Workstation | |||||||||||
| alciregi | qemu-kvm | [1] |
1.
#1870476,
|
|||||||||
| archie | qemu-kvm | [1] | [2] |
1.
everything as expected
2. everyhting as expected |
||||||||
| archmunky | qemu-kvm (fed32 kde spin) | [1] | [2] | [3] | [4] | [5] | [6] | [7] | [8] | [9] |
1.
KDE Spin does not allow not creating user or setting root password. System worked normally after install.
2. Working as expected 3. No errors 4. Logging is working normally 5. Updated successfully via cli 6. No issues were found 7. No issues found 8. Enforcing 9. No issues were found |
|
| augenauf | F33 nightly on VirtualBox (EFI, default partition layout, LUKS encrypt=True) | |||||||||||
| augenauf | F33 nightly, install from Live-CD, legacy bios, Encrypted, automatic partitioning, VirtualBox | |||||||||||
| bazar_assa | Bare Metal Fedora 33 (LXQT spin), 5.8.3-300.fc33.x86_64, Acer Aspire One, Intel(R) Celeron(R) CPU 847 @ 1.10GHz, WDC WD3200LPVT-22G33T0 | [1] | [2] |
1.
Ubuntu 20.20 on ext4 on the same physical disc.
2. Done with `sudo` |
||||||||
| bhavin192 | Fedora-Workstation-Live-x86_64-33-20200906.n.0 on QEMU/KVM | |||||||||||
| bt0dotninja | Thinkpad T440s Core i5 vpro bare metal | [1] | [2] | [3] | [4] | [5] |
1.
Worked as expected.
2. Worked as expected. 3. Worked as expected. 4. Worked as expected. 5. Enforcing by default |
|||||
| bt0dotninja | Thinkpad T440s Core i5 vpro bare metal from F32 to F33 whith /home preservation | [1] |
1.
Works without problems
|
|||||||||
| cagdas | qemu-kvm | |||||||||||
| cagdasbas | qemu-kvm | |||||||||||
| cj | [1] |
1.
Trouble Shooting option not an option on menu
|
||||||||||
| condor | qemu-kvm | [1] | [2] | [3] |
1.
I allowed the system to update on reboot.
2. Initially downgraded gnome-initial-setup before doing the update. 3. New all default installation of ws-Live-x86_64-33-20200829.n.0! |
|||||||
| ctucker1@lenovo.com | ||||||||||||
| dober@lenovo.com | Lenovo P620 bare metal with a Threadripper PRO 3975WX 16 GB ram Intel P620 Graphics card | |||||||||||
| dswbike | ||||||||||||
| dswbike | Desktop ASUS x470-prime, UEFI, Ryzen 2700x, 32GB RAM, AMD RX480, Samsung 860 EVO 500GB, WDC1005FBYZ, WDC10EZEX | [1] |
1.
Default BTRFS across all three drives
|
|||||||||
| faulTTY | Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz | |||||||||||
| franckf | qemu-kvm-amd64 | [1] | [2] |
1.
Fedora-Xfce-Live-x86_64-33-20200831.n.0.iso
2. #1827890, |
||||||||
| fuller | Bare Metal / XFCE Spin; no encryption on Lenovo ThinkCentre M91 2491 (i3-2120; 4 GB RAM) | [1] [2] [3] |
1.
Tried different HDD - install was again successful, but repeated error on boot: "No operating system found."
2. Attempted to reinstall - received error "Failed to remove old efi boot entry. This is most likely a kernel or firmware bug." 3. Unable to boot OS on restart post-install. Install from LiveOS ran successfully. May be system dependent (e.g. BIOS). Deliberately using old hardware for this test. |
|||||||||
| geraldosimiao | Fedora-KDE-Live-x86_64-33-20200829.n.0.iso KVM/qemu/virt-manager Chipset i440FX UEFI x86_64: /usr/shre/edk2/ovmf/OVMF_CODE.fd | |||||||||||
| grumpey | Bare metal Fedora 33 Prerelease (Everything 20200902) AMD FX-6100 (6) @ 3.300GHz AMD RX 550 Memory 16003Mib | |||||||||||
| horizon | ||||||||||||
| infrandomness | ||||||||||||
| infrandomness | VirtualBox VM | |||||||||||
| jakfrost | Bare Metal X86_64, 2 x 240GB SSD RAID1 (mounted at /), 1TB HDD mounted at /var, 8GB Memory | |||||||||||
| jdt | qemu-kvm | |||||||||||
| jesusc01 | QENU/KVM | [1] | [2] |
1.
As expected
2. As expected |
||||||||
| jesusc01 | VirtualBox | [1] | [2] | [3] | [4] | [5] | [6] | [7] | [8] | [9] |
1.
As expected
2. As expected 3. As expected 4. Last logs from current time 5. Updated 6. rpm reports vim not installed, but vim-enhanced installed. Everything else as expected 7. All in order 8. In enforcing mode 9. As expected |
|
| joydeep | qemu-kvm, Fedora 32 Workstation, GNOME 3.36.5, Intel i5-8250U(8)@3.400GHz | |||||||||||
| jpbn | iMac pro early 2008 | [1] | [2] | [3] |
1.
#1873045,
#,
2. used dnf install. "gnome software' can not install two packages. 3. not the expected results from https://fedoraproject.org/wiki/QA:Testcase_base_service_manipulation but: {kkkk$} su -c 'systemctl status chronyd.service' Password: ● chronyd.service - NTP client/server Loaded: loaded (/usr/lib/systemd/system/chronyd.service; disabled; vendor > Active: inactive (dead) Docs: man:chronyd(8) man:chrony.conf(5) [jaa]$ ps aux | grep chronyd jaap 2404 0.0 0.0 221464 860 pts/0 S+ 13:56 0:00 grep --color=auto chronyd |
|||||||
| kaandemircan | qemu-kvm | |||||||||||
| kronenpj | qemu-kvm-amd64 | [1] |
1.
dnf install -y gimp inkscape; rpm -q gimp inkscape; dnf erase -y gimp inkscape; rpm -q gimp inkscape; dependencies removed as well.
|
|||||||||
| kushal | vmware-fusion | |||||||||||
| lbazan | virtualbox | [1] | [2] | [3] | [4] |
1.
perfect
2. dnf update -y completed successsfull 3. [root@localhost ~]# getenforce Enforcing 4. [root@localhost ~]# systemctl status sshd ● sshd.service - OpenSSH server daemon Loaded: loaded (/usr/lib/systemd/system/sshd.service; disabled; vendor preset: disabled) Active: active (running) since Tue 2020-09-08 15:25:03 EST; 5min ago Docs: man:sshd(8) man:sshd_config(5) Main PID: 3507 (sshd) Tasks: 1 (limit: 4665) Memory: 4.2M CPU: 75ms CGroup: /system.slice/sshd.service └─3507 sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups |
||||||
| lnie | VM | |||||||||||
| lwh | baremetal dell e7450 i5-5300 Fedora-KDE-Live-x86_64-33-20200901.n.0.iso | [1] | [2] |
1.
KDE won't allow install without root password
2. No rescue or troubleshooting options shown in boot menu. The 404 in the test case probably meant to goto https://docs.fedoraproject.org/en-US/fedora/f32/install-guide/advanced/Boot_Opti... |
||||||||
| lwh | baremetal dell e7450 i5-5300 Fedora-LXQt-Live-x86_64-33-20200903.n.0.iso | [1] |
1.
Installer won't allow installation without root password
|
|||||||||
| lwh | qemu-kvm Fedora-KDE-Live-x86_64-33-20200906.n.0.iso | |||||||||||
| lwh | qemu-kvm basic desktop Fedora-Everything-netinst-x86_64-33-20200903.n.0.iso | |||||||||||
| malucious | Test image with libvirt. i7-6700K 4GB RAM. | [1] |
1.
I tested with ncdu and cmatrix. There were no errors.
|
|||||||||
| mr2dave | qemu-kvm | [1] |
1.
UNIT LOAD ACTIVE SUB DESCRIPTION
● mcelog.service loaded failed failed Machine Check Exception Logging Daemon
|
|||||||||
| nb | ||||||||||||
| nchudnoff | qemu-kvm (Fedora-LXQt-Live-x86_64-33-20200831) | [1] | [2] |
1.
Install w/ no user account, single btrfs partition, created user account after first boot
2. Used dnf to install/remove filelight and glmark2 |
||||||||
| nphilipp | QEMU/KVM x86_64 Fedora-Everything-netinst-x86_64-33-20200904.n.0.iso | |||||||||||
| penguin283 | Asus Prime B350M-E M.B./Ryzen 3 2200G; WD NVMe SSD/F32; WD SSD/Win 10; Kingston SSD/F33; Nvidia GTX 1650 | [1] |
1.
Did not have a ROOT password
|
|||||||||
| principis | ||||||||||||
| principis | I7 6700k GTX 1080 | |||||||||||
| pruthvi30sk | Intel® Core™ i7-8700U CPU @ 2.10GHz × 4 | [1] | [2] |
1.
Normal
2. As Expected |
||||||||
| psgnm | Bare Metal Fedora-Xfce-Live-x86_64-33-20200904.n.0.iso Dell XPS M1530, 4GB RAM, Core 2 Duo T9300, NVIDIA GeForce 8600M GT, BCM4312 WiFi | [1] |
1.
Should have mentioned that I tested with LUKS encryption and standard disk layout. All is working well.
|
|||||||||
| psgnm | Bare Metal Fedora-Xfce-Live-x86_64-33-20200904.n.0.iso Dell XPS M1530, 4GB RAM, Core 2 Duo T9300, NVIDIA GeForce 8600M GT, BCM4312 WiFi, LUKS encrypti on | [1] |
1.
Did not see a "Rescue a Fedora system" option under "Troubleshooting" on the XFCE install media (maybe that is expected).
|
|||||||||
| pwhalen | KVM, AArch64 | |||||||||||
| pwhalen | Raspberry Pi 3B (armhfp) | [1] |
1.
pxe install from Fedora-33-20200831.n.0
|
|||||||||
| pwhalen | Raspberry Pi 4B (4GB) - Fedora-Workstation-33-20200831.n.0.aarch64.raw.xz | [1] |
1.
Installed Stellarium and Shutter. Could not remove shutter in the GUI- "Unable to remove Shutter: removing not available.". Removed OK with dnf cli
|
|||||||||
| royboy626 | GeForce 7600GT/nouveau; Insignia TV(Dec 2011); 4 GB Memory 800MHz 2048MB/5-5-5-18; MSI P965 Mboard;Intel Core2 CPU 6600 @ 2.40GHz | [1] [2] | [3] | [4] | [5] |
1.
Initial set up as expected
2. KDE 20200901 iso to GUI on boot and hung:cursor move; no keyboard; Workstation 20200901 install to SATA platter hard drive; continuous graphic artifacts and blinking parts of screen in Gnome; `dnf upgrade` and no change; XFCE desktop installed and works perfect so far. login screen still a mess - for instance: icon to chng WM at lower right is 4 white blocks. Dual boot fc32 and other popular Linux OS with no issues on different hard drive. 3. 'Usable GUI': barely. login screen a mess with artifacts; pull-down menus almost unreadable; log out pop-up cannot read buttons: Cancel/Log out; Gnome: one star - graphical artifacts, blinking parts of terminal window; `dnf upgrade` did not change results - downloaded XFCE desktop and works perfect so far. Dual boot fc32 and other popular Linux OS with diff hard drive on this hardware with lightdm and no issues with the GUI environment. 4. Best dnfdragora yet; quick to display searched for packages 5. grep command OK; journalctl -b: org.gnome-Shell@x11.service: Skipped due to 'exec-condition' |
||||||
| sayaksarkar | qemu-kvm | [1] | [2] | [3] | [4] | [5] | [6] | [7] | [8] | [9] | [10] |
1.
1. Worked as expected.
2. For added brownie points, also tried out the entire installation process using the bn_IN locale as well. Worked perfectly (apart from some missing translations in the
setup utility and a few places within Anaconda)!
2. Worked as Expected! 3. Worked as expected! The greps resulted in no output, meaning no errors whatsoever! 4. Logs works as expected! 5. Updates installed without any errors. 6. Packages installed correctly but somehow `rpm -q vim` kept saying `package vim is not installed` even though it was installed. Tried running: ``` dnf install -y vim hexchat Results: Last metadata expiration check: 0:45:51 ago on রবিবার 06 সেপ্টেম্বর 2020 03:18:56 পূর্বাহ্ণ. Dependencies resolved. ============================================================================================================================== Package Architecture Version Repository Size ============================================================================================================================== Installing: hexchat x86_64 2.14.3-6.fc33 fedora 1.3 M vim-enhanced x86_64 2:8.2.1551-1.fc33 updates-testing 1.7 M Installing dependencies: gpm-libs x86_64 1.20.7-24.fc33 fedora 20 k vim-common x86_64 2:8.2.1551-1.fc33 updates-testing 6.6 M vim-filesystem noarch 2:8.2.1551-1.fc33 updates-testing 21 k Transaction Summary ============================================================================================================================== Install 5 Packages Total download size: 9.6 M Installed size: 39 M Downloading Packages: (1/5): vim-filesystem-8.2.1551-1.fc33.noarch.rpm 40 kB/s | 21 kB 00:00 (2/5): vim-enhanced-8.2.1551-1.fc33.x86_64.rpm 1.0 MB/s | 1.7 MB 00:01 (3/5): gpm-libs-1.20.7-24.fc33.x86_64.rpm 17 kB/s | 20 kB 00:01 (4/5): vim-common-8.2.1551-1.fc33.x86_64.rpm 3.4 MB/s | 6.6 MB 00:01 (5/5): hexchat-2.14.3-6.fc33.x86_64.rpm 259 kB/s | 1.3 MB 00:05 ------------------------------------------------------------------------------------------------------------------------------ Total 1.1 MB/s | 9.6 MB 00:08 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Installing : gpm-libs-1.20.7-24.fc33.x86_64 1/5 Installing : vim-filesystem-2:8.2.1551-1.fc33.noarch 2/5 Installing : vim-common-2:8.2.1551-1.fc33.x86_64 3/5 Installing : vim-enhanced-2:8.2.1551-1.fc33.x86_64 4/5 Installing : hexchat-2.14.3-6.fc33.x86_64 5/5 Running scriptlet: hexchat-2.14.3-6.fc33.x86_64 5/5 Verifying : vim-common-2:8.2.1551-1.fc33.x86_64 1/5 Verifying : vim-enhanced-2:8.2.1551-1.fc33.x86_64 2/5 Verifying : vim-filesystem-2:8.2.1551-1.fc33.noarch 3/5 Verifying : gpm-libs-1.20.7-24.fc33.x86_64 4/5 Verifying : hexchat-2.14.3-6.fc33.x86_64 5/5 Installed: gpm-libs-1.20.7-24.fc33.x86_64 hexchat-2.14.3-6.fc33.x86_64 vim-common-2:8.2.1551-1.fc33.x86_64 vim-enhanced-2:8.2.1551-1.fc33.x86_64 vim-filesystem-2:8.2.1551-1.fc33.noarch Complete! [root@localhost sayaksarkar]# rpm -q vim hexchat package vim is not installed hexchat-2.14.3-6.fc33.x86_64 ``` `dnf remove -y vim hexchat` worked as expected! 7. All services started properly! 8. SELinux is enabled in enforcing mode 9. Service manipulations worked as expected! 10. Couldn't run this test as I didn't have any non-live media. |
| shecks | HP EliteDesk. Intel® Core™ i5-4590S, 12Gig RAM, AMD GPU | [1] | [2] | [3] | [4] | [5] | [6] | [7] | [8] | [9] |
1.
Fresh install using entire disk (encrypted), The Initial Setup Utility ran automatically on first boot and new user created and works as expected
2. Installation boots as expected and login with newly created user is sucessful 3. No errors reported 4. Logging working as expected 5. DNF update works as expected 6. DNF package manager working as expected 7. the "systemctl --all --failed" command returns the following:- UNIT LOAD ACTIVE SUB DESCRIPTION ● systemd-vconsole-setup.service loaded failed failed Setup Virtual Console 8. SELinux is enabled in enforcing mode. 9. System service control working as expected |
|
| sidewinder040 | Dell Latitude E7240 Intel i7 | |||||||||||
| sidewinder040 | QEMU/KVM | [1] | [2] |
1.
Accepted default disk partitioning - worked flawlessly
2. Previously installed Vim, then successfully removed. |
||||||||
| sthi0460 | Bare metal x86_64 Fedora-33-20200908.n.0; Toshiba Portégé Z835-P330 - 13.3" - Core i3 2367M - 4 GB RAM - 128 GB SSD | |||||||||||
| suorcd | Bare Metal Fedora 33 (Workstation Edition Prerelease) x86_64, 5.8.3-300.fc33.x86_64, 1920x1080, Intel Xeon CPU E5506 @ 2.13GHz × 8 , NVIDIA Corporatio n G98 [Quadro NVS 295], 23.5 GiB RAM | [1] |
1.
rpm -q could not find vim, because dnf install vim-enhanced
$ sudo dnf install tree vim
...
Complete!
$ rpm -q tree vim
tree-1.8.0-5.fc33.x86_64
package vim is not installed
$ sudo dnf
remove tree vim
...
Complete!
$ rpm -q tree vim
package tree is not installed
package vim is not installed
========================================
$ sudo dnf install tree vim
...
Complete!
$ rpm -q tree vim-enhanced
tree-1.8.0-5.fc33.x86_64
vim-enhanced-8.2.1551-1.fc33.x86_64
$ sudo dnf remove tree vim
...
Complete!
$ rpm -q tree vim-enhanced
package tree is not installed
package vim-enhanced is not installed
|
|||||||||
| theo3000 | qemu-kvm | [1] |
1.
image: Fedora-Workstation-Live-x86_64-33-20200829.n.0.iso
|
|||||||||
| tiny6996 | qemu-kvm | |||||||||||
| webfiction | Bare metal HP notebook 15-ba071nd AMD A6-7310 memory 8 GB | |||||||||||
| webfiction | baremetal HP notebook 15-ba071nd AMD A6-7310, 8 GB / Mate-spin | |||||||||||
| zhanggyb | Bare Metal Fedora 33 (Workstation Edition Prerelease) x86_64, 5.8.3-300.fc33.x86_64, 2560x1440, Intel Core i3-8145U CPU @ 2.10GHz x 4, NVMe SSD 128GB, 4GB RAM |
| Username | Profile | Desktop Browser | Desktop Login | Audio Basic | Desktop Panel Basic | Desktop Automount | Workstation core Apps | Update graphical | Virtual Printer | Update notif | Error Checks | Comments |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Enter result | Enter result | Enter result | Enter result | Enter result | Enter result | Enter result | Enter result | Enter result | Enter result | |||
| GlennJohnson | [1] |
1.
Worked as expected.
|
||||||||||
| MarkPearson | Bare Metal Fedora 33 (Workstation Edition Prerelease) x86_64, 5.8.3-300.fc33.x86_64. Lenovo X1 Carbon G8. i7-10610U CPU, 16GB RAM, 256GB NVMe SSD | [1] | [2] | [3] |
1.
Note - I had an issue reconnecting to wifi after suspend/resume, but not reproducible
2. Basic testing was good. I'll see if I can test with more devices later 3. My network printer (HP Officejet Pro 8600) is showing up but not printing. Print dialog is stuck in 'getting info from printer'. It is working from my F32 install on the P1G2. |
|||||||
| aathomas | T440p, i5-4300M, 16GB RAM, SSD | [1] | [2] |
1.
Worked great.
2. Yes, it said " Hey You! I have updates, Patch me" |
||||||||
| acustico | OS: Fedora 33 (Workstation Edition Prerelease) x86_64 Host: 42912WG ThinkPad X220 Kernel: 5.8.3-300.fc33.x86_64 Packages: 1733 (rpm) Shell: bash 5 .0.17 Resolution: 1366x768 DE: GNOME 3.37.91 CPU: Intel i5-2540M (4) @ 3.300GHz GPU: Intel 2nd Generation Core Processor F Memory: 1392MiB / 15888MiB | |||||||||||
| akumar99 | VMware - Fedora 33 Workstation Edition Prerelease (AMD Ryzen 9 3900X - 4 cores, 8GB RAM, 100GB HD allotted) | [1] |
1.
After several unsuccessful attempts, it does not return to the account selection stage.
|
|||||||||
| alciregi | Dell XPS 13 9360, Intel i7-7500U, F33 Workstation | |||||||||||
| archmunky | qemu-kvm (fed32 kde spin) | [1] | [2] | [3] | [4] | [5] | [6] | [7] | [8] | [9] | [10] |
1.
No problems
2. Everything worked except sleep; could not get vm to resume 3. Installed audacious, listened to mp3 stream 4. No problems 5. No problems 6. No problems 7. Updated successfully from Discover 8. Successful using socket:// for Epson WF7710 9. Working as expected 10. No errors reported |
| augenauf | F33 nightly on VirtualBox (EFI, default partition layout, LUKS encrypt=True) | [1] | [2] | [3] | [4] | [5] |
1.
works
2. works 3. works 4. works 5. used dnfdragora on MATE desktop: works |
|||||
| augenauf | Gnome from F33 nightly, install from Live-CD, legacy bios, Encrypted, automatic partitioning, VirtualBox | |||||||||||
| bazar_assa | Bare Metal Fedora 33 (LXQT spin), 5.8.3-300.fc33.x86_64, Acer Aspire One, Intel(R) Celeron(R) CPU 847 @ 1.10GHz, WDC WD3200LPVT-22G33T0 | [1] | [2] |
1.
There is no ODD in my config
2. 2. dnfdragora-update can't start with [bazar@minefield ~]$ dnfdragora-updater Try reading configuration file From ./dnfdragora.yaml Skipped exception: <[Errno 2] ?????? ???????????? ?????????? ?????? ????????????????: './dnfdragora.yaml'> From /etc/dnfdragora/dnfdragora.yaml Finally read user settings from /home/bazar/.config/dnfdragora.yaml Logging disabled |
||||||||
| bt0dotninja | Thinkpad T440s Core i5 vpro bare metal | [1] |
1.
Works
|
|||||||||
| cagdas | qemu-kvm | |||||||||||
| condor | qemu-kvm | |||||||||||
| franckf | qemu-kvm-amd64 | |||||||||||
| gammafn | qemu-kvm, raw disk ATA ST3250318AS | |||||||||||
| geraldosimiao | Fedora-KDE-Live-x86_64-33-20200829.n.0.iso KVM/qemu/virt-manager Chipset i440FX UEFI x86_64: /usr/shre/edk2/ovmf/OVMF_CODE.fd | [1] |
1.
After logout and login again, it shows only blank screen. Need to start xserver from tty2, and returned with the error: kglobalaccel5 killed by SIGABRT (qt_message_output(QtMsgType,
QMessageLogContext const&, QString const&) [clone .cold]) => kf5-kglobalaccel-5.73.0-1.fc33
|
|||||||||
| idanka | FUJITSU ESPRIMO P520 E85+ Core i5-4570 | [1] |
1.
missing desktop files and icons
missing liveusb-creator or
Fedora Media Writer passed
|
|||||||||
| jakfrost | Bare Metal X86_64, 2 x 240GB SSD RAID1 (mounted at /), 1TB HDD mounted at /var, 8GB Memory | |||||||||||
| jesusc01 | VirtualBox | [1] | [2] | [3] | [4] |
1.
G Software: Transmission cannot be installed as its not supported, installed it anyway. Working fine
2. Restart and update ok 3. Popup 4. No errors reported |
||||||
| joydeep | qemu-kvm, Fedora 32 Workstation, GNOME 3.36.5, Intel i5-8250U(8)@3.400GHz | |||||||||||
| jpbn | iMac pro early 2008 | |||||||||||
| jpbn | iMac pro early 2008 | |||||||||||
| kronenpj | qemu-kvm-amd64 | [1] | [2] |
1.
Suspend on KVM generates kernel panic.
2. Not tested. |
||||||||
| lbazan | virtualbox | |||||||||||
| lwh | baremetal dell e7450 i5-5300 Fedora-KDE-Live-x86_64-33-20200901.n.0.iso | |||||||||||
| lwh | baremetal dell e7450 i5-5300 Fedora-LXQt-Live-x86_64-33-20200903.n.0.iso | |||||||||||
| lwh | qemu-kvm Fedora-KDE-Live-x86_64-33-20200906.n.0.iso | |||||||||||
| lwh | qemu-kvm basic desktop Fedora-Everything-netinst-x86_64-33-20200903.n.0.iso | |||||||||||
| mr2dave | qemu-kvm | |||||||||||
| nchudnoff | qemu-kvm (Fedora-LXQt-Live-x86_64-33-20200831) | [1] | [2] | [3] | [4] | [5] | [6] |
1.
Used default Falkon browser
2. All worked, though was unable to wake VM from sleep state (user error?) 3. Connected .iso file as CDROM (auto mounted ok); passed through host connected USB drive (auto mounted ok) 4. LXQT core applications (dnfdragora, Falkon, QTerminal, Enki, PCManFM-QT) all present; no virtualization front end app is installed. 5. Used dnfdragora 6. abrt logged error when attempting to suspend but this is likely a VM problem |
||||
| nphilipp | QEMU/KVM x86_64 Fedora-Everything-netinst-x86_64-33-20200904.n.0.iso | |||||||||||
| penguin283 | Asus Prime B350M-E M.B./Ryzen 3 2200G; WD NVMe SSD/F32; WD SSD/Win 10; Kingston SSD/F33; Nvidia GTX 1650 | [1] | [2] | [3] |
1.
All tests passed, Adblocker Plus installed and worked
2. Did not receive a pop-up notification but the Software app. showed updates were available. Downloaded and installed ok 3. Clean install on SSD with no errors |
|||||||
| principis | i7 6700k GTX 1080 | |||||||||||
| pruthvi30sk | Intel® Core™ i7-8700U CPU @ 2.10GHz × 4 | [1] | [2] | [3] | [4] |
1.
Working Normally
2. Working as Expected. 3. Not Tested. 4. Did not receive any notification during testing. |
||||||
| psgnm | Bare Metal Fedora-Xfce-Live-x86_64-33-20200904.n.0.iso Dell XPS M1530, 4GB RAM, Core 2 Duo T9300, NVIDIA GeForce 8600M GT, BCM4312 WiFi, LUKS encrypti on | [1] | [2] | [3] | [4] | [5] |
1.
Note that on XFCE, no default browser is set, but a dialog pops up to set the browser. I believe this is expected.
2. Accessibility menu is hard to use once you have selected the Large Font option in lightdm. A user was able to shutdown the computer when other users were logged in without any warnings. Note the "New Login" button in xscreensaver doesn't work in Xfce (this has been true for previous versions of the Xfce Spin of Fedora). This is because the wrong command is provided for "*newLoginCommand" in /etc/xscreensaver/XScreenSaver.ad. This likely should be "dm-tool switch-to-greeter" for lightdm. 3. The USB and CD was available to view in Thunar as expected. Unlike GNOME, Xfce does not automount and display the media. 4. Note that Xfce has not come with a virtualization front-end for previous versions of Fedora and Fedora 33 appears to continue the tradition. Otherwise, all core applications are available. 5. I generally use the command line for updates. It was a little awkward to select all of the packages to update in "dnfdragora". I tried to "Select All", but I don't think it did what I expected. I did work, but I opened up each individual group to select all of the package individually. Maybe user error. |
|||||
| pwhalen | Raspberry Pi 3B - Fedora-Xfce-armhfp-33-20200831.n.0-sda.raw | |||||||||||
| royboy626 | GeForce 7600GT/nouveau; Insignia TV(Dec 2011); 4 GB Memory 800MHz 2048MB/5-5-5-18; MSI P965 Mboard;Intel Core2 CPU 6600 @ 2.40GHz | [1] | [2] | [3] | [4] | [5] | [6] | [7] | [8] |
1.
XFCE used throughout the following tests
2. terminal to create second account; groupadd/useradd/passwd 3. XFCE 4. XFCE: no CDROM; USB icon displayed; able to mount with mouse click (as expected). 5. XFCE: Manual execution of all core apps from terminal OK. 6. dnfdragora: Seemed the default was Groups; chg to 'All' and also 'to update'. Updates appeared and installed. Not smart enough to find a 'Select All'. Had to click each update before 'Apply' 7. groups 'XFCE Desktop' prev installed. Had to download 'system-config-printer' to get 'Printer Settings' to appear under 'Administration'. Manual edit of cupsd.conf to allow network connections. Not user friendly, but my instructions for setup work. Perhaps 'system-config-printer' needs to be in 'XFCE Desktop'? Printer is directly connected to a PC on the LAN (no LAN IP address for printer). cups and avahi active. 8. dnfdragora: Update notification appears and removed with a click or with time. No notice as to how to install, but this is the fc32 behavior. |
||
| sayaksarkar | qemu-kvm | [1] | [2] | [3] | [4] | [5] | [6] | [7] | [8] | [9] | [10] |
1.
Firefox launched via all the usual ways in GNOME. Was able to log in to my FAS account. Was able to download the latest stable kernel release from the kernel website and was able to install ADB as
expected to Firefox.
2. Most things worked as expected. However, on clicking Suspend after switching back to the original user resulted in a system freeze and I had to do a hard reboot. 3. Audio worked as expected under all test scenarios. (sound settings worked fine. Totem also streamed the sound output as expected) 4. Worked as expected! 5. Automount worked as expected! 6. All the Workstation core applications were present and available from the Overview. Also, all apps executed and ran as expected without any issues. 7. Software Update worked as expected through the Software app! 8. CUPS seemed to work as expected. 9. Update Notifications pop out intermittently as expected! 10. No errors were reported! |
| shecks | HP EliteDesk. Intel® Core™ i5-4590S, 12Gig RAM, AMD GPU | [1] | [2] | [3] | [4] | [5] | [6] | [7] | [8] |
1.
Basic browser functionality working as expected
2. No issues 3. Audio playback working as expected 4. Works as expected 5. Both optical disc and USB key auto mounted as expected 6. Working as expected 7. Graphical update works as expected 8. Update notification working as expected |
||
| sidewinder040 | QEMU/KVM | [1] |
1.
Worked as expected
|
|||||||||
| sthi0460 | Bare metal x86_64 Fedora-33-20200908.n.0; Toshiba Portégé Z835-P330 - 13.3" - Core i3 2367M - 4 GB RAM - 128 GB SSD | [1] |
1.
Worked as expected
|
|||||||||
| suorcd | Bare Metal Fedora 33 (Workstation Edition Prerelease) x86_64, 5.8.3-300.fc33.x86_64, 1920x1080, Intel Xeon CPU E5506 @ 2.13GHz × 8 , NVIDIA Corporatio n G98 [Quadro NVS 295], 23.5 GiB RAM | |||||||||||
| theo3000 | qemu-kvm | [1] | [2] |
1.
Fedora-Workstation-Live-x86_64-33-20200829.n.0.iso
2. no printer |
||||||||
| zhanggyb | Bare Metal Fedora 33 (Workstation Edition Prerelease) x86_64, 5.8.3-300.fc33.x86_64, 2560x1440, Intel Core i3-8145U CPU @ 2.10GHz x 4, NVMe SSD 128GB, 4GB RAM |
| Username | Profile | Module List | Enable/disable module | Install Module | Update without repos | Update Module | Comments |
|---|---|---|---|---|---|---|---|
| Enter result | Enter result | Enter result | Enter result | Enter result | |||
| archmunky | qemu-kvm (fed32 kde spin) | [1] | [2] | [3] | [4] | [5] |
1.
No problems found
2. No problems found 3. No problems found 4. No problems found 5. dnf module update works - dnf update module in text does not |
| bazar_assa | Bare Metal Fedora 33 (LXQT spin), 5.8.3-300.fc33.x86_64, Acer Aspire One, Intel(R) Celeron(R) CPU 847 @ 1.10GHz, WDC WD3200LPVT-22G33T0 | ||||||
| jesusc01 | VirtualBox | [1] | [2] | [3] | [4] | [5] |
1.
disabled, enabled and installed returns empty
2. As expected 3. httpd, perl:5.32, mariadb:10.4/client ok check ok 4. update --disalerepo=... nothing to do 5. no errors |
| kronenpj | qemu-kvm-amd64 | [1] | [2] | [3] |
1.
Used postgresql:9.6
2. Used postgresql:9.6 and postgresql:9.6/client 3. No errors |
||
| lwh | baremetal dell e7450 i5-5300 Fedora-KDE-Live-x86_64-33-20200901.n.0.iso | ||||||
| lwh | baremetal dell e7450 i5-5300 Fedora-LXQt-Live-x86_64-33-20200903.n.0.iso | ||||||
| lwh | qemu-kvm basic desktop Fedora-Everything-netinst-x86_64-33-20200903.n.0.iso | ||||||
| nchudnoff | qemu-kvm (Fedora-LXQt-Live-x86_64-33-20200831) | [1] | [2] | [3] |
1.
Tested w/ nginx
2. Tested with nginx:mainline 3. Passes, if using "dnf module update nodejs" instead of "dnf update nodejs" (as other tester indicates, error in instructions)? |
||
| penguin283 | Asus Prime B350M-E M.B./Ryzen 3 2200G; WD NVMe SSD/F32; WD SSD/Win 10; Kingston SSD/F33; Nvidia GTX 1650 | ||||||
| royboy626 | GeForce 7600GT/nouveau; Insignia TV(Dec 2011); 4 GB Memory 800MHz 2048MB/5-5-5-18; MSI P965 Mboard;Intel Core2 CPU 6600 @ 2.40GHz | [1] | [2] | [3] | [4] | [5] |
1.
`dnf upgrade` executed 200906; Tests passed
2. "not every module has a default stream or default profile" Used ruby. `dnf module install ruby:master` FAIL; `dnf module install ruby/default` OK. If possible every modules should have both defaults. 3. #1876245, `dnf module enable ruby:master` (results OK) `dnf module install ruby:master` FAIL: "No default profiles for module ruby:master. Available profiles: default" 4. with nodejs:10 PASSED 5. Not smart enough to get instructions to work. Referenced comments of other testers, and still no success. |
| sayaksarkar | qemu-kvm | [1] | [2] [3] | [4] | [5] | [6] |
1.
Worked as expected
2. Works as expected! 3. [sayaksarkar@localhost ~]$ sudo dnf module enable module:stream Last metadata expiration check: 0:00:30 ago on Sunday 06 September 2020 09:18:17 PM. Error: Problems in request: missing groups or modules: module:stream 4. Not sure if I'm doing something wrong but I keep getting errors here: [sayaksarkar@localhost ~]$ sudo dnf module install postgresql Last metadata expiration check: 0:04:44 ago on Sunday 06 September 2020 09:22:43 PM. Cannot enable more streams from module 'postgresql' at the same time Unable to resolve argument postgresql Error: Problems in request: broken groups or modules: postgresql [sayaksarkar@localhost ~]$ sudo dnf module install ruby Last metadata expiration check: 0:05:00 ago on Sunday 06 September 2020 09:22:43 PM. Cannot enable more streams from module 'ruby' at the same time Unable to resolve argument ruby Error: Problems in request: broken groups or modules: ruby [sayaksarkar@localhost ~]$ sudo dnf module install cobbler:3 Last metadata expiration check: 0:05:44 ago on Sunday 06 September 2020 09:22:43 PM. No default profiles for module cobbler:3. Available profiles: default Error: Problems in request: broken groups or modules: cobbler:3 5. Passed as expected! 6. Ran without errors! |
| theo3000 | qemu-kvm | [1] |
1.
Fedora-Workstation-Live-x86_64-33-20200829.n.0.iso
|
||||
| zhanggyb | Bare Metal Fedora 33 (Workstation Edition Prerelease) x86_64, 5.8.3-300.fc33.x86_64, 2560x1440, Intel Core i3-8145U CPU @ 2.10GHz x 4, NVMe SSD 128GB, 4GB RAM | [1] | [2] | [3] |
1.
Used django
2. Used swig:4.0 3. Used 'dnf module update nodejs' |
| Username | Profile | Guided Empty | Guided Delete All | Guided Multi Select | Guided Delete Partial | Guided free space | Guided encrypted | Guided Multi Empty All | Guided Shrink (known broken, please skip) | Comments |
|---|---|---|---|---|---|---|---|---|---|---|
| Enter result | Enter result | Enter result | Enter result | Enter result | Enter result | Enter result | Enter result | |||
| aathomas | T440p, i5-4300M, 16GB RAM, SSD | |||||||||
| adamthiede | [1] |
1.
Thinkpad X230 (Legacy Boot/MBR)
|
||||||||
| alciregi | Dell XPS 13 9360, Intel i7-7500U, F33 Workstation | |||||||||
| alciregi | qemu-kvm | |||||||||
| archmunky | qemu-kvm (fed32 kde spin) | [1] | [2] |
1.
Works as expected
2. Works as expected |
||||||
| augenauf | F33 nightly on VirtualBox (EFI, default partition layout, LUKS encrypt=True) | [1] |
1.
btrfs on LVM, automatic installer --> works
|
|||||||
| bt0dotninja | Thinkpad T440s Core i5 vpro bare metal from F32 to F33 whith /home preservation | |||||||||
| frakk_qzh | GPD Pocket (Intel Atom x7-Z8750 processor 8GB LPDDR3 memory + 128GB eMMC) | [1] |
1.
This was using Fedora-Workstation-Live-x86_64-33-20200825.n.1. The GPD Pocket had its original Windows 10 install. Booting from the live image, the Window OS partition is mounted. When using the
guided install and choosing delete all, the process will fail because the Windows partition is mounted. After unmounting the partition in Nautilus, using the delete all in the installer works without issue. The same happened in the F33 MATE image but I was unable to get to a terminal or gui file browser to unmount the partition.
|
|||||||
| idanka | FUJITSU ESPRIMO P520 E85+ Core i5-4570 | |||||||||
| jdt | qemu-kvm | |||||||||
| jesusc01 | VirtualBox | [1] |
1.
previous btrfs partition shows as not resizeable
ext4 partition shrinks normally
|
|||||||
| kronenpj | qemu-kvm-amd64 | [1] | [2] | [3] [4] [5] |
1.
/dev/vda2 on / type btrfs (rw,relatime,seclabel,space_cache,subvolid=258,subvol=/root)
/dev/vda2 on /home type btrfs (rw,relatime,seclabel,space_cache,subvolid=256,subvol=/home)
/dev/vda1 on
/boot type ext4 (rw,relatime,seclabel)
2. Existing disk had /boot (vda1) and / (vda2). Removed old '/' installed system. New system booted from old 'vda1' as it was still set as the bios boot partition. fdisk -l: Device Boot Start End Sectors Size Id Type /dev/vda1 * 2048 2099199 2097152 1G 83 Linux /dev/vda2 2099200 4196351 2097152 1G 83 Linux /dev/vda3 4196352 41943039 37746688 18G 83 Linux df /boot: /dev/vda2 999320 184336 746172 20% /boot Cleared vda1 using dd, system still booted. 3. XFS filesystem in a partition identified as available for shrinking. However, 0 bytes are reclaimable and the slider is partially greyed out. XFS doesn't support shrinking, so this is a little misleading to the user. 4. Physical volume (LVM) not resizable under Anaconda. 5. Existing BTRFS volume not recognized as resizable in anaconda. |
|||||
| lwh | baremetal dell e7450 i5-5300 Fedora-KDE-Live-x86_64-33-20200901.n.0.iso | |||||||||
| lwh | baremetal dell e7450 i5-5300 Fedora-LXQt-Live-x86_64-33-20200903.n.0.iso | |||||||||
| sayaksarkar | qemu-kvm | [1] | [2] | [3] | [4] |
1.
Installation succeeded as expected.
2. Pre-existing storage volumes deleted as expected and the specified partition layout was created. Installation was also successful. 3. Partial deletion worked as expected after selecting the reclaim space option. Continued with the layout configuration and the installation. The installation was successful. Rebooting into the system and running `df -T` shows the expected file system layout. 4. The BTRFS partition doesn't seem to be resizeable. However, shrinking an ext4 partition seems to work as expected. |
||||
| sidewinder040 | Dell Latitude E7240 Intel i7 | |||||||||
| theo3000 | qemu-kvm | |||||||||
| webfiction | Bare metal HP notebook 15-ba071nd AMD A6-7310 memory 8 GB | [1] |
1.
ext4 volumes from existing F32
|
|||||||
| zhanggyb | Bare Metal Fedora 33 (Workstation Edition Prerelease) x86_64, 5.8.3-300.fc33.x86_64, 2560x1440, Intel Core i3-8145U CPU @ 2.10GHz x 4, NVMe SSD 128GB, 4GB RAM | [1] |
1.
#1874430,
Additional partition(s) will be created, is this by design?
|
| Username | Profile | Experimental | Comments |
|---|---|---|---|
| Enter result | |||
| akik | Acer Aspire TimelineX AS3820T laptop, Fedora-KDE-Live-x86_64-33-20200828.n.0.iso + updates, btrfs on /boot and / | [1] [2] [3] |
1.
/boot on btrfs subvolume works using a single btrfs filesystem. If you want to create additional btrfs-only installs on the same btrfs filesystem, you can use the advanced custom ui to set up the
additional btrfs subvolumes.
2. Filling the rootfs on btrfs doesn't seem to cause any problems. I was able to fill the rootfs until only 64k was left on it and that couldn't be used. I then reset the computer and booted by removing "quiet splash" and adding "systemd.unit=multi-user.target". The latter option was needed so that Xorg wouldn't try to start and fail in a loop making the removal of files difficult. 3. I ran the following commands from /etc/rc.d/rc.local for two hours (i.e. write file and reset while writing): https://pastebin.com/raw/TshwPzhu btrfs didn't once fail to mount on next boot and didn't spend any time in file system checks. |
| lbazan | virtualbox | [1] |
1.
[root@localhost ~]# df -hT
Filesystem Type Size Used Avail Use% Mounted on
devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 2.0G 0 2.0G 0%
/dev/shm
tmpfs tmpfs 786M 1.4M 785M 1% /run
/dev/sda2 btrfs 49G 6.4G 42G 14% /
tmpfs tmpfs 2.0G 48K 2.0G 1% /tmp
/dev/sda2 btrfs 49G 6.4G 42G 14% /home
/dev/sda1 ext4 976M 229M 681M 26% /boot
tmpfs tmpfs 393M 164K 393M 1% /run/user/1000
tmpfs tmpfs 393M 64K 393M 1% /run/user/0
[root@localhost ~]# date
Tue Sep 8 03:39:53 PM EST 2020
|
| royboy626 | GeForce 7600GT/nouveau; Insignia TV(Dec 2011); 4 GB Memory 800MHz 2048MB/5-5-5-18; MSI P965 Mboard;Intel Core2 CPU 6600 @ 2.40GHz | [1] |
1.
vncviewer via ssh tunnel; compile rpm audio-recorder-3.1-3.fc33.x86_64; gnupg; tix/tcl/tk/python3-tkinter
|
| sayaksarkar | qemu-kvm | [1] |
1.
Played around a bit with resizing partitions. It seemed to work fine (as long as I was being reasonable with the fs size)!
[sayaksarkar@localhost ~]$ df -T
Filesystem Type 1K-blocks
Used Available Use% Mounted on
devtmpfs devtmpfs 991816 0 991816 0% /dev
tmpfs tmpfs 1012660 0 1012660 0% /dev/shm
tmpfs tmpfs 405068 2276 402792 1% /run
/dev/vda3 btrfs 10485760 5981672 4323528 59% /
tmpfs tmpfs 1012664 56 1012608 1% /tmp
/dev/vda3 btrfs 10485760 5981672 4323528 59% /home
/dev/vda2 ext4 999320 159064 771444 18% /boot
/dev/vda1 vfat 613184 20876 592308 4% /boot/efi
tmpfs tmpfs 202532 168 202364 1% /run/user/1000
[sayaksarkar@localhost ~]$ sudo btrfs filesystem resize 10g /home
Resize '/home' of '10g'
[sayaksarkar@localhost ~]$ df -T
Filesystem Type 1K-blocks Used Available Use% Mounted on
devtmpfs devtmpfs 991816 0 991816 0% /dev
tmpfs tmpfs 1012660 0 1012660 0% /dev/shm
tmpfs tmpfs 405068 2268 402800 1% /run
/dev/vda3 btrfs 10485760 6089152 4216480 60% /
tmpfs tmpfs 1012664 48 1012616 1% /tmp
/dev/vda3 btrfs 10485760 6089152 4216480 60% /home
/dev/vda2 ext4 999320 159064 771444 18% /boot
/dev/vda1 vfat 613184 20876 592308 4% /boot/efi
tmpfs tmpfs 202532 168 202364 1% /run/user/1000
[sayaksarkar@localhost ~]$ sudo btrfs filesystem resize 5g /home
Resize '/home' of '5g'
ERROR: unable to resize '/home': No space left on device
[sayaksarkar@localhost ~]$ sudo btrfs filesystem resize 7g /home
Resize '/home' of '7g'
[sayaksarkar@localhost ~]$ df -T
Filesystem Type 1K-blocks Used Available Use% Mounted on
devtmpfs devtmpfs 991816 0 991816 0% /dev
tmpfs tmpfs 1012660 0 1012660 0% /dev/shm
tmpfs tmpfs 405068 2268 402800 1% /run
/dev/vda3 btrfs 7340032 6102112 1057552 86% /
tmpfs tmpfs 1012664 48 1012616 1% /tmp
/dev/vda3 btrfs 7340032 6102112 1057552 86% /home
/dev/vda2 ext4 999320 159064 771444 18% /boot
/dev/vda1 vfat 613184 20876 592308 4% /boot/efi
tmpfs tmpfs 202532 168 202364 1% /run/user/1000
|
| sidewinder040 | QEMU/KVM | [1] |
1.
Set up Snapper and created an initial snapshot of root subvolume. The installed python3-dnf-plugin-snapper and checked the snapshot creation when installing/removing Vim - worked ok.
Didn't test
snapper rollback.
|